Longacre Air Tank_Filler Gauge Manuel d'utilisateur télécharger pdf

Air Tank / Filler Gauge

1) Install your style air quick change fitting in the brass push-button valve (1/4” NPT).

2) Connect your quick change fittings to the end of the red hose and in the filler gauge

(1/4”NPT).

3) Open the black master valve – turn counterclockwise (MUST be open).

4) Connect your air supply line. Push the button valve. The air tank should fill in less

than 10 sec.

DO NOT EXCEED 125 PSI.

1)Push-Button Valve

Tank Gauge:

Filler Gauge

DO NOT EXCEED 125 psi.

1) Connect Filler/Gauge to short red air line from tank.

2) Hold chuck on tire valve stem. Use lever to add air. Release to see pressure on

gauge. Bleed off excess pressure with button on side of gauge.

• Filler gauge can and should be used as your regular tire gauge for

consistency.

Misc. Other Notes:

• When used without tank, air can be bled rapidly from the tire by pushing the

lever rather than the bleed button.

• Always use “dry” air. Drain the tank as needed to prevent moisture buildup.

• NEVER EXCEED 125 psi.

4) Your

Air Line

And

Quick

Disconnect

Fitting

2) Red Hose

To Filler/

Gauge

3) Black

Master

Valve

Air Tank / Filler Gauge 1) Install your style air quick chang

Pas de commentaire

Longacre Air Tank_Filler Gauge Manuel d'utilisateur