Longacre 50370 Temperature Compensated Tire Pressure Gauge Manuel d'utilisateur télécharger pdf

1/09

TO TAKE PRESSURES: Turn unit on (auto-Zeros at turn on). If Zero

is needed quickly tap On/Off button. To turn off hold

On/Off button 1 sec. True factory calibrated pressure

will be shown.

Be sure

TRUE FACTORY Calibration

is on the

display in the lower right.

If not push lock temp button.

TO SAVE THIS PRESSURE TO THE DISPLAY: Push

Store Memory button. That pressure will be stored

on the display. Start at the Right Front, then the Right Rear,

Left Rear, then Left Front. Once you have all 4 pressures no

more can be stored without clearing. If you have stored

the wrong pressure push and hold Store Memory

2 seconds. The last reading will be cleared. Release button

and retake pressure. To clear all 4 continue to hold

Store Memory for 3 seconds.

TO TAKE TIRE TEMPERATURES: Push mode button. Display will

change as shown. Take temps as you normally would. Insert

the probe into the tire to the same depth each time, on the

outside edge, the center, then inside edge.

TO SAVE TEMPS ON THE DISPLAY (all 12 if desired):

Take temps as you normally would. Insert the probe into

the tire - first on the outside edge, the center, then inside

edge. Wait until temp stabilizes. Push Store Memory

button at each point. Start at the Right Front, then the Right

Rear, Left Rear, then Left Front (this is the order the temps are saved to the

display). Once you have 12 temps no more can be saved

without clearing. If you have saved the wrong temperature

push and hold Store Memory 2 seconds. The last reading

will be cleared. Release button and retake temp. To clear all temps

continue to hold Store Memory button for 3 seconds.

TO TAKE TEMPERATURES AND TIRE PRESSURES AT THE SAME TIME: Save valuable practice time

and get your pressures and temps as fast as possible. Start at the Right Front and take tire temps,

saving them on the display as described above (remember to start at the outside of the tire, then center, then inside - this is

how it is saved to the display). When you have the 3 temps push the mode button to switch to the Pressure

Mode. Take the pressure as usual and save it on the display - described above. Move on to the

Right Rear, Left Rear, and Left Front, taking pressures and temps at the same time. When done all

12 temps and 4 pressures will be displayed to analyze or record.

176

146 152 161 198 209 216

210 204 221 245 253 266

32.3

18.5 32.3

16.3 28.8

Press Comp

OFF

Active Temp

TRUE

FACTORY

Calibration

Ultra fast temp

response

All 12 temps

displayed at once

All 4 tire pressures

displayed

Nite light

Monroe, Wa 360 453 2030 www.longacreracing.com

(Temperature Compensating) Digital Tire Pressure Gauge

Indicates

actual true

pressures (NOT

compensated)

Temperature

Mode

1 2 3

Résumé du contenu

Page 1 - is on the

1/09TO TAKE PRESSURES: Turn unit on (auto-Zeros at turn on). If Zerois needed quickly tap On/Off button. To turn off holdOn/Off button 1 sec. True

Page 2 - FOR METRIC CONVERSION:

TO TAKE TEMPERATURE COMPENSATED TIRE PRESSURES:(compensated or corrected back to a standard temperature) Connect the tire probeincluded on the lower r

Page 3 - QuickStart Instructions

TO TAKE PRESSURES: Turn unit on (auto-Zeros at turn-on). If Zero is needed quickly tap On/Offbutton. To turn off hold On/Off button 1 sec. True Fac

Commentaires sur ces manuels

Pas de commentaire

Longacre 50370 Temperature Compensated Tire Pressure Gauge Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Longacre 50370 Temperature Compensated Tire Pressure Gauge. Longacre 50370 Temperature Compensated Tire Pressure Gauge User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Longacre 50370 Temperature Compensated Tire Pressure Gauge